NEWS

The Advantage of “Cable Specialization”: Why Single-Minded Cable Focus Makes OMG a Better Partner for Connector Manufacturers

In electric mobility and high-voltage energy systems, the reliability of the entire system hinges on the mechanical, thermal, and electrical interface between connectors and cables. For R&D engineers at automotive Tier 1 suppliers and connector Original Equipment Manufacturers (OEMs), unoptimized cable specifications introduce severe failure modes: terminal crimp fatigue, localized partial discharge, electromagnetic interference (EMI) ingress, and IP seal degradation under harsh thermal cycling conditions. Connector companies sourcing off-the-shelf commodity cables frequently face elevated risks of excessive physical tolerances and field failures.

Guangdong OMG Transmitting Technology Co., Ltd. (OMG’) specializes exclusively in electric vehicle conduction technology. With 31 years of dedicated R&D in new energy cable innovation, OMG’ provides connector manufacturers with custom-fitted dimensions, strictly controlled outer diameter (OD) concentricity, and proprietary material formulations, significantly improving assembly yields for finished connector systems.

Strategic Advantages of Dedicated Cable Manufacturing

For global connector manufacturers—including those producing CCS1, CCS2, NACS, and fully sealed high-voltage interconnect systems—partnering with a specialized cable manufacturer yields three core engineering advantages:

 

Strict Geometric Concentricity for Crimp Integrity and Sealing: Standard cable extrusion processes often suffer from outer jacket ovality and inner conductor eccentricity. OMG’ utilizes dual-axis laser measurement systems to ensure inner core concentricity exceeds 90%, with outer diameter tolerances strictly controlled within ±0.15mm. This geometric precision guarantees uniform radial compression on sealing grommets, allowing interconnect assemblies to reliably achieve IP67 and IP6K9K environmental protection ratings.

 

Proprietary Polymer Formulation Technologies: Long-term interconnect reliability relies heavily on the chemical compatibility of insulation materials with potting compounds, overmolding polymers, and silicone seals. OMG’s cross-linked polyolefin (XLPO/XLPE) and thermoplastic elastomer (TPE/TPU) formulations prevent plasticizer migration and leaching, providing high tear strength and abrasive resistance to the outer jacket.

 

Zero Market Conflict: By focusing entirely on conduction technology, OMG acts strictly as an enabler rather than a downstream competitor to connector makers. Connector OEMs gain a dedicated engineering partner focused on helping assemblies pass rigorous automotive validation (such as USCAR or ISO standards) without fearing market encroachment on completed cable harness assemblies.

  •  

EV Charging Cables: Precision-Engineered for Couplers and Inlets

EV charging couplers (Type 1, Type 2, GB/T, and NACS) endure demanding operational conditions: frequent vehicle run-over forces, tight bending storage, chemical exposure, and cyclic bending fatigue. For charging gun and inlet OEMs, internal conductors must maintain exceptionally low contact resistance while carrying high continuous current loads within tight ergonomic enclosures.

OMG’s charging cable platform complies with major global standards:

  • North American Standards:UL 2263 (EVE, EVJE cable categories)
  • European Standards:EN 50620 / IEC 62893 (covering AC and DC high-power charging platforms)
  • Chinese Standards:GB/T 33594 (conductive charging systems for electric vehicles)

 

Key Engineering Features Empowering Connector Integration

  1. Superior Dynamic Flex Fatigue Resistance:Utilizing Class 6 ultra-fine oxygen-free copper strand configurations (with single-wire diameters ranging from $0.05\text{ mm}$ to $0.08\text{ mm}$), cables withstand over 50,000 continuous cold-flex and dynamic bending cycles, minimizing stress concentration fractures at the strain relief terminal base.
  2. Optimization for Liquid-Cooled High-Power Charging (HPC):Designed for 350kW to 600kW+DC ultra-fast charging systems, OMG liquid-cooled cable architectures integrate cooling channels directly adjacent to terminal contact bodies, preventing localized overheating at coupler pin interfaces.

 

Automotive High-Voltage Cables: EMI Shielding Safeguards for Powertrain Systems

Inside the vehicle chassis, electrical interconnects between the traction battery pack, Power Distribution Unit (PDU), inverter, and electric drive motor demand automotive-grade high-voltage cabling. During integration, high-voltage connector designers encounter challenges like High-Voltage Interlock (HVIL) spatial limitations, electro-magnetic interference (EMI), and tight chassis routing radii.

Electromagnetic Compatibility (EMC) Performance

To prevent high-frequency switching harmonics generated by the inverter from interfering with low-voltage Electronic Control Units (ECUs), the backshell shield of the connector must establish a low-impedance connection with the cable braid. OMG high-voltage cables implement a dual-shielding design:

  • Laminated Aluminum Foil Tape Wrap:Delivers 100% optical coverage against high-frequency fields.
  • High-Density Tinned Copper Braid Mesh:Achieves >95% optical coverage, maintaining a surface transfer impedance below 30Ωm/m at 30MHz 

This structure ensures stable 360° circumferential crimping with standard connector ferrules without shearing individual shield strands during automated compression processes.

Technical Parameter Comparison: OMG Electric Vehicle Conduction Solutions

Parameter / Requirement

OMG EV Charging Cable Series

OMG Powertrain High-Voltage Cable Series

Applicable Standards

IEC 62893, EN 50620, UL 2263, GB/T 33594

ISO 19642, LV 216, UL 758, QC/T 1037

Rated Voltage

450/750V AC up to 1000V/1500V DC

600V AC / 900V DC up to 1000V AC / 1500V DC

Conductor Configuration

Class 6 ultra-flexible bare/tinned copper

Class 5 / Class 6 soft annealed copper or aluminum alloy

Insulation & Jacket Materials

Modified Thermoplastic Polyurethane (TPU) / High-Elasticity TPE

Irradiation Cross-linked Polyolefin (XLPO) / XLPE

Operating Temperature

-40°C to +90°C

-40°C to +125°C / +150°C

Mechanical Properties

Drag/abrasion resistant, tear resistant, oil/ozone resistant, low-temp flexibility

Thin-wall lightweight construction, reduced bend radii

Connector Integration Focus

Ergonomic tactile feel, backshell strain relief integration

Concentricity for crimp ferrules, 360° shield continuity, thermal aging endurance

 

Co-Engineering: Empowering Next-Generation High-Voltage Interconnects

As automotive architectures shift toward 800V and 1000V high-voltage platforms, tolerance budgets at the cable-to-connector interface become extremely stringent. Joule heating at conductor joints, contact fretting corrosion, and high-frequency noise require tight engineering collaboration across the supply chain.

By continuously investing technical capital into material innovations and specialized manufacturing processes, Guangdong OMG Transmitting Technology Co., Ltd. (OMG) delivers cable platforms specifically engineered to complement high-performance connector designs. For connector OEMs and harness integrators, this focus streamlines assembly lines, improves first-pass yields, and ensures long-term operational safety across the vehicle lifecycle.

Scroll to Top

Customer Feedback

.

0769-82231900

.

leo@omigr.com